Laborer’s Efficiency of Gypsum Plastering in Sulaimani City’s Projects

Authors

  • Atta Shekh Karim Abdullah Deanery, College of Engineering,Sulaimani Polytechnic University, Sulaimani, Iraq Author
  • Noori Sadeq Ali Civil Engineering Department, College of Engineering, Cihan University, Erbil, Iraq Author
  • Payjor Ali Shonm Abdullah Civil Engineering Department, College of Engineering, University of Sulaimani, Sulaimani, Iraq Author

DOI:

https://doi.org/10.24017/science.2019.2.3

Keywords:

Gypsum plastering, Interior finishing works, Laborer’s efficiency, Labor productivity, Skillful, Skillfulness, Powerful, Powerfulness

Abstract

In this study, the Laborer’s Efficiency (LE) in building projects in Sulaimani City practically on field sites were investigated for Gypsum plastering (GP). Accordingly, four constructional different buildings as Multistory, commercial and houses were considered. Overall 11 main important factors during 30 practical records on field sites were practically observed.  As a result, for the first time the Laborers’ Efficiency (LE) was measured and classified into three categories high, medium and low for two specific heights which were 0-2 m and 2-3 meters height of walls. On the other hand, it concluded that the LE for the height of 0-2m affected on LP from 15.18 to 21.35m2/hr., with a proportion of 40.6%. In addition to the LE affected-on LP for the height of 2-3m and varied the LP range between 13.33-15 m2/hr., with a proportion of 12.5%.

Downloads

Published

06-10-2019

Issue

Vol. 4 No. 2 (2019): December 2019

Section

Pure and Applied Science

Similar Articles

1-10 of 56

You may also start an advanced similarity search for this article.